5083 Aluminum plate

<strong>5083 belongs</strong> to Al-Mg-Si alloy, which is widely used, especially in the construction industry.<br> <strong>It is the most promising alloy. </strong>Good corrosion resistance, good weldability, good cold processing, and has moderate strength.<br> <strong>5083 is magnesium, </strong>which has good forming performance, corrosion resistance, weldability and medium strength. <br> <strong>5083 aluminum </strong>is one of the most widely used antirust<br>

5052 Aluminum plate

<strong>5052 aluminum sheets</strong> belong to Al-Mg aluminum alloy, where magnesium is the main element inside. <br> <strong>This kind of alloy</strong> is the most extensively used anti-rust aluminum and it has high strength, extraordinary fatigue resistance, excellent plasticity and corrosion resistance; it is non-heat treatable: it has high plasticity at annealed condition, good plasticity when semi-cold hardening, while low plasticity during cold hardening. <br> <strong>It can be polished</strong> and has good corrosion resistance, excellent weldability, but poor machinability. <br> <strong>5052 aluminum sheets</strong> have been certified by ASTM B209 and our production are all conducted according to international standards.

6061 Aluminum plate

<strong>6061</strong> is a common duralumin with good machinability and moderate strength. <br> <strong>6061</strong> is a heat-treatable alloy with good formability, weldability, machinability, and moderate strength.<br> <strong>It can still </strong>maintain good operation after annealing.<br> <strong>If there is a certain </strong> amount of manganese and chromium, the bad effect of iron can be neutralized.

6161-T6 Aluminum plate

<strong>Thickness&nbsp;</strong> 0.1-400mm，etc<br> <strong>Length:</strong>100-12000mm，or as required<br> <strong>Width:</strong>20-3000mm，etc<br> <strong>Standard:</strong>ASTM，AISI，JIS，GB，&nbsp;DIN，EN<br> &nbsp; &nbsp; <strong>Certification:</strong>ISO, SGS，BV